What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
10.06.2025 03:06

It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
In schematic diagrams this is the symbol for a fuse:
But it can get overloaded, and no longer works.
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
Upvotes:
[old diagram got deleted by accident]
One
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
The bolt then partially travels down the line to your home.
Why is money considered to be the root of all evil?
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
A fuse is a non-resetable over current circuit protector.
One is “what exactly is in a ‘surge protector’ ? ”
Wing and Walmart are bringing drone delivery to 100 new stores - The Verge
What is lightning?
2024–10–10[John johnson John Johnson ]
but I think this circuit , shows a few more pieces.
This device then solves the entire problem.
but this device (an Inductor) … impedes the rapid changes in the current.
(Dc diagram shown, AC is similar).
The two rules investors need to follow right now as the S&P 500 eyes a return to 6,000 - MarketWatch
The third is lightning and “how it gets conducted into a home.”
First Sentence:
so, what happens?
A circuit breaker is similar, but is resettable.
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
At one ohm, the resistor has a maximum of 1 watt power.
2024–10–16 [ OO OLAOYE OYEBODE ]
Should transgender Ideology be renamed "Gender Revisionism/Biological Denialism"?
These devices are installed between the “hot” and “neutral” and protective ground.
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
What is the general opinion of psychologists on Donald Trump's presidency?
This is where the MOV conducts again, and dissipated the energy.
He then describes Rainy Season and Lightning.
2024–10–14 [Omar Gharbi Omar Gharbi ]
The Best Lunch to Eat if You Have High Cholesterol, Recommended by a Dietitian - EatingWell
This one hit behind the barn.
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
He then describes the function of a fuse.
a photo is worth a thousand words.
nine
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
This is where this question deviates from being a 'generic' question, and becomes more specific.
For this case there are devices called Metal oxide varistors (MOV).
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
There are three different concepts here that are getting confused.
He then asserts :
Barnstars:
There are two important concepts here.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
It seems Mohan does not understand the difference between a comment and an Answer.
[image of Common-mode choke]
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
eight
Because the load is inductive, the current lags the voltage.(by a bit).
The MOV will conduct when the voltage exceeds 50% of line voltage.
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
I post the exact comment here.
This is 'the assistant's answer'
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
Now when you have a certain ac resistance, then a current flows in a loop.
Here is a simplified AC power diagram.
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
But… the neutral is now “floating” because of the 1 ohm resistance.
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
the problem then depends on "how fast does the fuse operate?".
An AC voltage/ current source, and an ac inductive load.
Edit 2024–10.
It also is a device that limits the change in current flow.
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
The other is “what does a “fuse” do?”
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
What does a fuse do?
what exactly is a ‘surge’ protector?
At least they know the answer if they wanted it.
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
So, the voltage could go up to 500 volts, and the fuse will not open up.
These are simplified answers to the original question, and does not change anything I wrote above.
This is the picture of an electronic coil of wire wound around a core of magnetic material.
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.